| Specifications |
|
| Power Rating: |
600 Watts Per Channel @ 2 Ohms
450 Watts Per Channel @ 4 Ohms
300 Watts Per Channel @ 8 Ohms
1200 Watts Per Total @ 2 Ohms
|
| Mic/Line Inputs: |
8 - Balanced 1/4" TRS Phone Line
Inputs
8 - Balanced XLR Mic Inputs |
| Main Inputs: |
2 - 1/4" TRS Phone Inputs |
| AUX Sends: |
1 - 1/4" TRS Phone |
| AUX Returns: |
1 - 1/4" TRS Phone |
| Inserts: |
6 - 1/4" TRS Phone (channels 1-6) |
| BUS (Group) Outputs: |
No stereo bus only |
| Main Out: |
Mixer Line Out: single 1/4" TRS
Phone |
| Tape I/O: |
Tape Out: (L/R) RCA stereo jacks
Tape In: (L/R) RCA stereo jacks |
| Monitor Outputs: |
Monitor: single 1/4" TRS Phone |
| EQ Section: |
Rumble Reduction: 75Hz, -18dB/octave
Channel EQ:
High +/- 15dB @ 12kHz
Mid +/- 12dB @ 2.5kHz
Low +/- 15dB @ 80Hz
Graphic EQ: ISO oct. centers 9 bands, +/-15dB Q=1.414
@ 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16kHz |
| Solo/Mute: |
No |
| Channel Level Control: |
Rotary Potentiometers (POTS) |
| Trim/Gain Control: |
Channel Gain Control: Sealed Rotary Potentiometers
(POTS)
Gain (amp in to speaker out):
26.4dB (21 V/V) |
| Phantom Power: |
+15 VDC |
| Metering: |
8 - Segment Peak LED Indicators |
| Frequency Response: |
Mic Input to Main Mixer Output (Trim
at 0 dB):
+0, -1dB 32Hz to 20kHz
+0, -3dB 16Hz to 80kHz
Mic Input to Power Amp Output @ rated power output:
+0, -1dB 32Hz to 20kHz
+0, -3dB 16Hz to 55kHz |
| Signal-to-Noise Ratio: |
20Hz - 20kHz bandwidth, 150-ohm source
impedance,
Equivalent Input Noise (EIN)
-127 dBu |
| Total Harmonic Distortion (THD): |
THD and SMPTE IMD; 20Hz to 20kHz:
Mic Input to Main Mixer Output:
< 0.005% @ +4 dBu output
Mic Input to Power Amp Output:
< 0.15% 250mW to rated power |
| Outer Dimension |
|
| Height: |
11.7 in. |
| Width: |
20.5 in. |
| Depth: |
13 in. |
| Weight: |
32 lbs. |
